air in system
and how to fix

air in system
and how to fix

air in system
and how to fix

Shower Pumps

Air can build up in a pump installation over time and when not used regularly. It can cause a variety of issues that are often blamed on the pump. However, a simple air test can clear out your installation and solve the issue - at no extra cost!

  • pump pulsing
  • pump running on
  • excessive noise
  • temperature fluctuation

If your installation is suffering with any of the above, it would be worth running the air test to eliminate air as a fault cause.

Need more information?



 
telephone

01793 820142

Monday - Friday, 9am - 5pm

 

 



 
fast identification

email a photo

ID for direct or nearest match. 

 

 

Complete an air test!

Follow these instructions to remove air from your pump installation.

1. Turn off pump.

2. Remove shower head from hose.

3. Let hose hang into bath or shower tray.

4. Turn the temperature to full cold.

5. Turn the shower on and run for 5 minutes.

6. Turn the temperature to full hot and run for a further 5 minutes.

7. Turn off the shower.

8. Wait at least 20 minutes.

9. Re-power the pump and turn on the shower to test.


A one time or repeated air test could solve your pump installation woes. Or you could try our Installation Fault Finder for other targeted solutions.

Do you have an uncontrolled heat source? This may cause air build up in your pipework.
Please browse our temperature control range below.

Temperature Control (NBS_ProductView)

  • Shop By Brand

  • Oso Super Xpress VIP SX

    Highly Efficient Floor Standing Cylinder

    • 120 - 300 Litre Capacity
    • Superior Duplex 2304 Stainless Steel

      Call 01793 820142 for ETA

    Ecocirc (+)

    High Efficiency Circulators

    • Pump Housing Cast Iron
    • Max Head up to 8.0m
    • Length 130mm or 180mm
      Call 01793 820142 for ETA

    If the air test does not resolve your issue, a regenerative pump that can handle air may be required.
    Please browse our quiet Supergen regenerative range below.

    Supergen Brass (NBS_ProductView)

  • Shop By Brand

  • Smartboost SMP

    Variable Speed Pumps with Install Kit

    • Domestic / Light Commercial Boosting
    • Max Pressure up to 6.6 Bar
    • Max Flow up to 140 lpm
      Next Working Day Delivery

    Boosterpack 30

    Fixed Speed Pump & 280 Litre Tank

    • Cold Water Boosting, CAT5 Air Gap
    • Max Pressure up to 4.6 Bar
    • Max Flow up to 90 lpm
      Call 01793 820142 for ETA

    Flood Kit

    7.0 m Flood Kit

    • Quick, Emergency Dewatering
    • Ready To Use
    • Lightweight, Portable
      Call 01793 820142 for ETA

    Smart 10

    12 Amp Digital Pressure Switch

    • Compact, Lightweight Design
    • High Accuracy and Screen Resolution
    • Replaces Teddington or Sq D Switches
      Call 01793 820142 for ETA

    Ecocirc XLPLUS

    High Efficiency Circulators

    • Max Head up to 12.0 m
    • Max Flow up to 1000 lpm
    • Length up to 360 mm
      Call 01793 820142 for ETA

    Piranhamat Single

    Sewage & Waste Water Removal

    • Compact, Robust Collection Tank
    • Single Shredding Submersible
    • Reliable & Economical
      Call 01793 820142 for ETA

    ResiSHIELD

    Fire Sprinkler Pump Set

    • BS 9251:2021 Compliant
    • Domestic CAT1
    • Single Dwelling
      Call 01793 820142 for ETA

    Water Softener Metered

    Properties with Variable Water Usage

    • Small, Medium or Large
    • Full Flow Fitting Kit Included
    • Drinking Water Filter System Included
      Call 01793 820142 for ETA

    Smartpro Single Vertical SM

    Variable Speed Pumps with Install Kit

    • Domestic / Light Commercial Boosting
    • Max Pressure up to 7.7 Bar
    • Max Flow up to 165 lpm
      Call 01793 820142 for ETA

    Piranhamat Twin

    Sewage & Waste Water Removal

    • Compact, Robust Collection Tank
    • Twin Shredding Submersibles
    • Reliable & Economical
      Call 01793 820142 for ETA

    Water Softener High Flow

    Properties with High Demand

    • Medium or Large
    • Full Flow Fitting Kit Included
    • Drinking Water Filter System Included
      Call 01793 820142 for ETA

    AF & AFP Conditioners

    Powered & Unpowered Options Available

    • Reverse the Effects of Hard Water
    • Protect Your Appliances
    • Fit & Forget Installation
      Call 01793 820142 for ETA

    Evoplus

    High Efficiency Circulators

    • Max Head up to 18.0 m
    • Max Flow up to 1260 lpm
    • Length up to 450 mm
      Call 01793 820142 for ETA

    Acoustic Rubber Bellows Flexible

    Absorbs Vibration from Pump Installation

    • Optional Sizing 1.0" to 1.5"

      Call 01793 820142 for ETA

    Logicflow

    Flow Controller

    • Controls and Protects the Pump
    • Dry Run Protection
    • Maintenance Free
      Call 01793 820142 for ETA

    Systempro MDPE

    Variable Speed with Optional Insulation

    • Domestic / Light Commercial Boosting
    • Pressure up to 6.5 Bar
    • Flow up to 120 lpm
      Call 01793 820142 for ETA

    Smartboost Meta

    Variable Speed Pumps with Install Kit

    • Domestic / Garden / Irrigation
    • Max Pressure up to 4.7 Bar
    • Max Flow up to 130 lpm
      Call 01793 820142 for ETA

    Brass Hose Tail Adaptor

    Optional Size 1.0" or 1.25"

    • General Purpose Fittings
    • Suitable for Submersibles

    Inverter Drive

    Motor Output 1Ph x 1Ph

    • Maintains Constant Pressure
    • Independent of Flow
    • Compact Design
      Call 01793 820142 for ETA

    Minibox

    Domestic Water Lifting Station

    • Clean Water
    • Max Head up to 11.0 m
    • Max Flow up to 225 lpm
      Call 01793 820142 for ETA

    PVC Suction & Delivery Hose

    Optional Size & Length

    • 1.0" ID (25 mm) or 1.25" ID (32 mm)
    • Length 10.0 m, 20.0 m, 30.0 m
    • Max. Pressure 6.0 Bar
      Call 01793 820142 for ETA

    Hose Clip

    Optional Span Size

    • General Purpose Fittings
    • Suitable for Submersibles

    Insulation Jacket Plant Room 800

    Recommended with 800 Litre Modular Tank

    • Maintains Stable Temperature within Tank
    • Protects from Overheating & Freezing
    • Suitable for Internal Use
      Call 01793 820142 for ETA

    Insulation Jacket Plant Room 525

    Recommended with 525 Litre Modular Tank

    • Maintains Stable Temperature within Tank
    • Protects from Overheating & Freezing
    • Suitable for Internal Use
      Call 01793 820142 for ETA

    Economy Insulation Jacket

    Optional Sizes Available

    • Maintains Stable Temperature within Tank
    • Protects from Overheating & Freezing
    • Suitable for Internal Use
      Next Working Day Delivery

    Y Strainer

    Optional Connection Size

    • Brass Construction
    • Threaded Ends

      Call 01793 820142 for ETA

    GHV (X)

    Variable Speed 1 - 8 Pump Sets

    • Commercial Boosting
    • Max Head up to 160.0 m
    • Max Flow up to 2130 lpm
      Call 01793 820142 for ETA  

    Advance Large Conditioners

    Advanced Domestic Scale Control

    • Reverse the Effects of Hard Water
    • No External Power Required
    • 10 Year Warranty
      Call 01793 820142 for ETA

    Tiper

    Water Recirculation

    • Swimming Pool, Spa, Whirlpool
    • Max Head up to 9.3 m
    • Max Flow up to 350 lpm
      Call 01793 820142 for ETA

    Tiper 2

    Water Recirculation

    • Swimming Pool, Spa, Whirlpool
    • Max Head up to 15.0 m
    • Max Flow up to 400 lpm
      Call 01793 820142 for ETA







    about us 

    Pump World's philosophy is to provide quality pump solutions that are energy saving and low on noise without compromising on performance. 

    The Pump World team are here to help you put together the right boosting equipment to optimise your system. Our sister company, Smart Showers, sources the finest Italian shower design for a luxury bathroom experience.

    Together, Pump World and Smart Showers provide an all-encompassing system solution - designed to suit you.

    Pump World   A limited company, registered in England. VAT No: GB535638919.
    Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.

     

    payment methods

               

    Text/HTML